top of page

Sweedon Environment Solution

Manufacturers of Environmental Simulation Products  for R&D and Quality Control 

  • Standard Features of most chambers :

Internal Finish:

  • Interior made up of vapour tight pre-polished 16 Swg 304 grade SS with adjustable/ removable shelving .

External Finish:

  • Outer material is 16 Swg CRCA/SS with primed and phosphate epoxy based electrostatic powder coating finishing for a aesthetic appearance 

Insulation:

  • Environment friendly free of asbestos and CFC. Guarantees the best possible insulation values and hence the lowest possible operating costs

Work space conditioning

  • Air circulation within the  chamber is Laminar airflow provided with suitable capacity of fan motor and impeller for uniform distribution of temperature and humidity to maintain within specified limits

Heating system:

  • Fast responding U-shaped jacketed air heaters are used to achieve the desired positive temperature. Air heaters are placed in the conditioning plenum such that there is no direct radiation from the heaters on to the test specimen

Door & Gasket:

  • Robust with hinges fitted on the right hand side of the chamber with front opening single door. Leak proof double lined silicon gasket will be provided

Ports &  Holes:

  • Even in the standard version of the equipment all sizes are equipped with two standard ports.These are located on left or Right side of the test chamber and can be used for inserting measurement and control cables and other  supply connections or additional equipment

Viewing Window:

  • The multi pane window consists of 4 toughened clear glasses sealed with silicone and separated by spacers to form a completely vacuumed window. 

Safety:

  • The  test chamber is equipped with an adjustable cut-out against high and low temperatures.

  • Low water level cyt-off with alarm issued visually as well as acoustically .

  • In addition a potential –free contact is available.

  • Every electrical functional circuit is equipped with its own safety facility which shuts down the functional circuit affected or the entire test chamber in case of a malfunction.

bottom of page